Eclipse V6-3.0L SOHC (2003)
STEP 4. Check the wiring harness between park/neutral position switch connector B-41 (terminal 8) and the ignition switch (IG1).
NOTE: Also check junction block connectors C-111, C-112 and intermediate connector C-28. If junction block connectors C-111, C-112 or
intermediate connectors C-28 is damaged, repair or replace the connector as described in Harness Connector Inspection.
Q: Is the wiring harness between park/neutral position switch connector B-41 (terminal 8) and the ignition switch (IG1) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. If the rear wiper operates normally, it indicates that a correct "R" position signal is sent from the park/neutral position
switch.