mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2468 > < Initial Inspection and Diagnostic Overview|Page 2466
Page 404
background image

STEP 5. Check park/neutral position switch connector B-41 and ETACS-ECU connector C-117 for damage.

Q: Are park/neutral position switch connector B-41 and ETACS-ECU connector C-117 in good condition?

YES: Go to Step 6.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the rear wiper operates normally, it indicates that a correct "R"
position signal is sent from the park/neutral position switch.

Initial Inspection and Diagnostic Overview|Page 2468 > < Initial Inspection and Diagnostic Overview|Page 2466