mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2471 > < Initial Inspection and Diagnostic Overview|Page 2469
Page 407
background image

Q: Is the wiring harness between park/neutral position switch connector B-41 (terminal 7) and ETACS-ECU connector C-117 (terminal 39) in good
condition?

YES: Replace the ETACS-ECU. If the rear wiper operates normally, it indicates that a correct "R" position signal is sent from the park/neutral
position switch.

NO: Repair the wiring harness. If the rear wiper operates normally, it indicates that a correct "R" position signal is sent from the park/neutral position
switch.

Inspection Procedure O-6

The ETACS-ECU Does Not Receive Any Signal From The Driver's Or The Front Passenger's Door Switch.

Front Door Switches Input Circuit Part 1

Initial Inspection and Diagnostic Overview|Page 2471 > < Initial Inspection and Diagnostic Overview|Page 2469