Eclipse V6-3.0L SOHC (2003)
Q: Are the windshield wiper and washer switch in good condition?
YES: Go to Step 3.
NO: Replace the column switch. If the equipment, which are described in "CIRCUIT OPERATION", work normally, the input signal from the column
switch (windshield wiper and washer switch) should be normal.
STEP 3. Replace the ECU.
1. Replace the column switch (turn-signal light and lighting switch).
2. If the equipment, which are described in "CIRCUIT OPERATION", work normally, the input signal from the column switch (windshield wiper
and washer switch) should be normal.
Q: Does the column switch (windshield wiper and washer switch) send a normal signal to the ECU?
YES: No action to be taken.
NO: Replace the ETACS-ECU. If the equipment, which are described in "CIRCUIT OPERATION", work normally, the input signal from the
column switch (windshield wiper and washer switch) should be normal.
Inspection Procedure O-9
Column Switch: ETACS-ECU Does Not Receive Any Signal From The Windshield Intermittent Wiper Interval Adjusting Knob.
Windshield Intermittent Wiper Interval Adjusting Knob Input Circuit
CIRCUIT OPERATION
The ETACS-ECU calculates the windshield intermittent wiper interval according to the position of the windshield intermittent wiper interval adjusting
knob, which is incorporated in column switch (windshield wiper and washer switch).
TECHNICAL DESCRIPTION (COMMENT)
