Eclipse V6-3.0L SOHC (2003)
STEP 2. Check column switch connector C-86 and ETACS-ECU connector C-118 for damage.
Q: Are column switch connector C-86 and ETACS-ECU connector C-118 in good condition?
YES: Go to Step 3.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the wiper interval can be adjusted normally, it indicates that the
windshield intermittent wiper interval adjusting knob should send a signal to the ECU.
STEP 3. Check the wiring harness between column switch connector C-86 (terminal 6) and ETACS-ECU connector C-118 (terminal 66).
Q: Is the wiring harness between column switch connector C-86 (terminal 6) and ETACS-ECU connector C-118 (terminal 66) in good condition?
YES: Go to 4.
NO: Repair the wiring harness. If the wiper interval can be adjusted normally, it indicates that the windshield intermittent wiper interval adjusting
knob should send a signal to the ECU.
STEP 4. Replace the ECU.
1. Replace the ETACS-ECU.
2. If the wiper interval can be adjusted normally, it indicates that the windshield intermittent wiper interval adjusting knob should send a signal to the
ECU.
Q: Can input signal be confirmed when the windshield intermittent wiper interval adjusting knob is operated?
YES: No action to be taken.
