Eclipse V6-3.0L SOHC (2003)
STEP 5. Check key reminder switch connector C-88 and ETACS-ECU connector C-117 for damage.
Q: Are key reminder switch connector C-88 and ETACS-ECU connector C-117 in good condition?
YES: Go to Step 6.
NO: Repair or replace the connector.Refer to Harness Connector Inspection. If the functions, which are described in "CIRCUIT OPERATION", work
normally, the input signal from the key reminder switch should be normal.
STEP 6. Check the wiring harness between key reminder switch connector C-88 (terminal 6) and ETACS-ECU connector C-117 (terminal 30).
Q: Is the wiring harness between key reminder switch connector C-88 (terminal 6) and ETACS-ECU connector C-117 (terminal 30) in good condition?
YES: Go to Step 7.
NO: Repair the wiring harness. If the functions, which are described in "CIRCUIT OPERATION", work normally, the input signal from the key
reminder switch should be normal.
STEP 7. Check continuity between every two terminals other than key reminder switch connector C-88 terminals 4 and 6.
1. Measure at key reminder switch connector C-88 without disconnecting the connector.