Eclipse V6-3.0L SOHC (2003)
STEP 13. Check the wiring harness between front passenger's door lock key cylinder switch connector E-06 (terminals 1 and 3) and
ETACS-ECU connector C-117 (terminals 42 and 31).
NOTE: Also check intermediate connector C-95. If intermediate connectors C-95 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between front passenger's door lock key cylinder switch connector E-06 and ETACS-ECU connector C-117 in good condition?
YES: Replace the ETACS-ECU. If the systems, which are described in "CIRCUIT OPERATION", work normally, the input signal from the front
passenger's door lock key cylinder switch should be normal.
NO: Repair the wiring harness. If the systems, which are described in "CIRCUIT OPERATION", work normally, the input signal from the front
passenger's door lock key cylinder switch should be normal.
Inspection Procedure P-5
The ETACS-ECU Does Not Receive Any Signal From The Driver's Or Passenger's Door Lock Actuator Switch.