Eclipse V6-3.0L SOHC (2003)
STEP 8. Check the front passenger's door lock actuator switch.
Disconnect front passenger's door lock actuator switch connector E-07. Then check continuity between the switch terminals.
Q: Is the front passenger's door lock actuator switch in good condition?
YES: Go to Step 9.
NO: Replace the front passenger's seat door lock actuator switch. If the functions, which are described in "CIRCUIT OPERATION", work normally,
the input signal from the front passenger's door lock actuator switch should be normal.
STEP 9. Measure at front passenger's door lock actuator switch connector E-07 in order to check the ground circuit to the front passenger's
door lock actuator switch.
1. Disconnect front passenger's door lock actuator switch connector E-07, and measure at the harness side.
