Eclipse V6-3.0L SOHC (2003)
STEP 2. Check the door lock switch (power window main switch).
Remove the power window main switch. Refer to Door - Door Trim and Waterproof Film. Then check continuity between the switch terminals.
Q: Is the door lock switch (power window main switch) in good condition?
YES: Go to Step 3.
NO: Replace the power window main switch. If the central door locking system works normally, input signal from the door lock switch should be
normal.
STEP 3. Check at power window main switch connector E-12 in order to check the power window main switch ground circuit.
1. Disconnect power window main switch connector E-12, and measure at the harness side.
