Eclipse V6-3.0L SOHC (2003)
STEP 5. Check the wiring harness between power window main switch E-12 (terminal 9) and ground.
NOTE: Also check intermediate connector C-91. If intermediate connectors C-91 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between power window main switch connector E-12 (terminal 9) and ground in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. If the central door locking system works normally, input signal from the door lock switch should be normal.
STEP 6. Check power window main switch connector E-12 and ETACS-ECU connector C-117 for damage.
Q: Are power window main switch connector E-12 and ETACS-ECU connector C-117 in good condition?
YES: Go to Step 7.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the central door locking system works normally, input signal from the
door lock switch should be normal.
