Eclipse V6-3.0L SOHC (2003)
STEP 7. Check the wiring harness between power window main switch connector E-12 (terminals 3 and 10) and ETACS-ECU connector C-117
(terminals 33 and 34).
NOTE: Also check intermediate connector C-91. If intermediate connectors C-91 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between power window main switch connector E-12 (terminals 3 and 10) and ETACS-ECU connector C-117 (terminals 33 and
34) in good condition?
YES: Replace the ETACS-ECU. If the central door locking system works normally, input signal from the door lock switch should be normal.
NO: Repair the wiring harness. If the central door locking system works normally, input signal from the door lock switch should be normal.
