Eclipse V6-3.0L SOHC (2003)
STEP 13. Check the wiring harness between power window sub switch connector E-05 (terminals 1 and 3) and ETACS-ECU connector C-117
(terminals 33 and 34).
NOTE: Also check intermediate connector C-95. If intermediate connectors C-95 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between power window sub switch connector E-05 (terminals 1 and 3) and ETACS-ECU connector C-117 (terminals 33 and 34)
in good condition?
YES: Replace the ETACS-ECU. If the central door locking system works normally, input signal from the door lock switch should be normal.
NO: Repair the wiring harness. If the central door locking system works normally, input signal from the door lock switch should be normal.
Inspection Procedure P-7
ETACS-ECU Does Not Receive An Auto-stop Signal From The Rear Wiper Motor.
