Eclipse V6-3.0L SOHC (2003)
STEP 5. Check the wiring harness between rear wiper motor connector F-07 (terminal 1) and the ignition switch (ACC).
NOTE: Also check intermediate connector F-24 and junction block connectors C-101 and C-111. If intermediate connector F-24 or junction block
connector C-101 or C-111 is damaged, repair or replace the connector as described in Harness Connector Inspection.
Q: Is the wiring harness between rear wiper motor connector F-07 (terminal 1) and the ignition switch (ACC) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. If the rear wiper operates normally, it indicates that a correct auto-stop signal is sent from the rear wiper motor.