mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2544 > < Initial Inspection and Diagnostic Overview|Page 2542
Page 480
background image

STEP 5. Check hood switch connector A-23 and ETACS-ECU connector C-117 for damage.

Q: Are hood switch connector A-23 and ETACS-ECU connector C-117 in good condition?

YES: Go to Step 6.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the theft-alarm system operates normally, it indicates that a correct
signal is sent from the hood switch.

Initial Inspection and Diagnostic Overview|Page 2544 > < Initial Inspection and Diagnostic Overview|Page 2542