mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2550 > < Initial Inspection and Diagnostic Overview|Page 2548
Page 486
background image

STEP 3. Check liftgate latch switch connector P-16 <ECLIPSE-Vehicle with theft-alarm system> or trunk lid latch switch connector F-16
<ECLIPSE SPYDER-Vehicle with theft-alarm system> for damage.

Q: Is liftgate latch switch connector F-16 <ECLIPSE-Vehicle with theft-alarm system> or trunk lid latch switch connector F-16 <ECLIPSE
SPYDER-Vehicle with theft-alarm system> in good condition?

YES: Go to Step 4.

NO: Repair or replace it. Refer to Harness Connector Inspection. The input signal from the liftgate latch switch <ECLIPSE> or the trunk lid latch
switch <ECLIPSE SPYDER> should be able to be checked and the functions, which are described in the "Technical Description (comment)," should
work normally.

STEP 4. Check the harness wire between liftgate latch switch connector F-16 (terminal 2) <ECLIPSE-Vehicle with theft-alarm system> or
trunk lid latch switch connector F-16 (terminal 2) <ECLIPSE SPYDER-Vehicle with theft-alarm system> and ground.

Q: Is the harness wire between liftgate latch switch connector F-16 (terminal 2) <ECLIPSE-Vehicle with theft-alarm system> or trunk lid latch switch
connector F-16 (terminal 2) <ECLIPSE SPYDER-Vehicle with theft-alarm system> and ground in good condition?

YES: There is no action to be taken.

NO: Repair it. The input signal from the liftgate latch switch <ECLIPSE> or the trunk lid latch switch <ECLIPSE SPYDER> should be able to be
checked and the functions, which are described in the "Technical Description (comment)," should work normally.

Initial Inspection and Diagnostic Overview|Page 2550 > < Initial Inspection and Diagnostic Overview|Page 2548