Eclipse V6-3.0L SOHC (2003)
NOTE: After checking intermediate connector C-90, check the wires. If intermediate connector C-90 is damaged, repair or replace it. Refer to Harness
Connector Inspection.
Q: Are the harness wires between liftgate latch switch connector F-16 (terminal 1) <ECLIPSE-Vehicle with theft-alarm system>, liftgate light switch
connector F-13 (terminal 1) <ECLIPSE-Vehicle without theft-alarm system>, trunk lid latch switch connector F-16 (terminal 1) <ECLIPSE
SPYDER-Vehicle with theft-alarm system> or trunk light switch connector F-13 (terminal 1) <ECLIPSE SPYDER-Vehicle with theft-alarm system> and
ETACS-ECU connector C-118 (terminal 1) <ECLIPSE> or C-117 (terminal 1) <ECLIPSE SPYDER> in good condition?
YES: Replace the ETACS-ECU. The input signal from the liftgate latch switch <ECLIPSE> or the trunk lid latch switch <ECLIPSE SPYDER>
should be able to be checked and the functions, which are described in the "Technical Description (comment)," should work normally.
NO: Repair them. The input signal from the liftgate latch switch <ECLIPSE> or the trunk lid latch switch <ECLIPSE SPYDER> should be able to be
checked and the functions, which are described in the "Technical Description (comment)," should work normally.
Inspection Procedure P-10
The Liftgate Lock Key Cylinder Switch <ECLIPSE> Or The Trunk Lid Lock Key Cylinder Switch <ECLIPSE SPYDER> Signal Is Not Sent
To The ETACS-ECU.