Eclipse V6-3.0L SOHC (2003)
STEP 1. Check the liftgate lock key cylinder switch <ECLIPSE> or the trunk lid lock key cylinder switch <ECLIPSE SPYDER>.
Q: Is the liftgate lock key cylinder switch <ECLIPSE> or the trunk lid lock key cylinder switch <ECLIPSE SPYDER> in good condition?
YES: Go to Step 2.
NO: Replace the liftgate lock key cylinder switch <ECLIPSE> or the trunk lid lock key cylinder switch <ECLIPSE SPYDER>. When the theft-alarm
system operates normally, check that the signal is input normally from the liftgate lock key cylinder switch <ECLIPSE> or the trunk lid lock key
cylinder switch <ECLIPSE SPYDER>.
STEP 2. Check the liftgate lock key cylinder switch <ECLIPSE> or the trunk lid lock key cylinder switch <ECLIPSE SPYDER> ground circuit
at trunk lid lock key cylinder switch connector F-10.
1. Disconnect liftgate lock key cylinder switch <ECLIPSE> or trunk lid lock key cylinder switch <ECLIPSE SPYDER> connector F-10 and measure
at the harness side.
2. Measure the resistance between terminal 2 and ground.
-
The measured value should be 2 ohm or less.
Q: Does the measured resistance value correspond with this range?
YES: Go to Step 5.
