Eclipse V6-3.0L SOHC (2003)
STEP 6. Check the harness wires between the liftgate lock key cylinder switch connector F-10 (terminal 1) <ECLIPSE> or the trunk lid lock
key cylinder switch connector F-10 (terminal 1) <ECLIPSE SPYDER> and ETACS-ECU connector C-117 (terminal 27).
NOTE: After checking intermediate connector C-90, check the wires. If intermediate connector C-90 is damaged, repairer replace it. Refer to Harness
Connector Inspection.
Q: Are the harness wires between the liftgate lock key cylinder switch connector F-10 (terminal 1) <ECLIPSE> or the trunk lid lock key cylinder switch
connector F-10 (terminal 1) <ECLIPSE SPYDER> and ETACS-ECU connector C-117 (terminal 27) in good condition?
YES: Replace the ETACS-ECU. When the theft-alarm system operates normally, check that the signal is input normally from the liftgate lock key
cylinder switch <ECLIPSE> or the trunk lid lock key cylinder switch <ECLIPSE SPYDER>.
NO: Repair them.When the theft-alarm system operates normally, check that the signal is input normally from the liftgate lock key cylinder switch
<ECLIPSE> or the trunk lid lock key cylinder switch <ECLIPSE SPYDER>.
Inspection Procedure P-11