Eclipse V6-3.0L SOHC (2003)
Vehicle Speed Sensor Input Circuit Part 2
CIRCUIT OPERATION
The ETACS-ECU controls the windshield intermittent wiper interval according to the vehicle speed sensor signal.
TECHNICAL DESCRIPTION (COMMENT)
If the signal is not normal, the wiper interval, which is described in "CIRCUIT OPERATION", will not be changed correctly. If the signal is not normal,
the vehicle speed sensor or the ETACS-ECU may be defective.
TROUBLESHOOTING HINTS
-
Malfunction of the vehicle speed sensor
-
Malfunction of the ETACS-ECU
-
Damaged harness wipes or connectors
DIAGNOSIS
Required Special Tools:
-
MB991223: Test Harness Set
-
MB991502: Scan Tool (MUT-II)
STEP 1. Check that the combination meter (speedometer) works normally.
Q: Does the combination meter (speedometer) work normally?
YES: Go to Step 2.
NO: Refer to Inspection procedure O-8 "ETACS-ECU does not receive a signal from the windshield mist switch."
