mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2561 > < Initial Inspection and Diagnostic Overview|Page 2559
Page 497
background image

STEP 2. Check ETACS-ECU connector C-118 and vehicle speed sensor connector B-39 for damage.

Q: Are ETACS-ECU connector C-118 and vehicles speed sensor connector B-39 in good condition?

YES: Go to Step 3.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the wiper interval can be adjusted normally, it indicates that the
windshield intermittent wiper interval adjusting knob should send a signal to the ECU.

Initial Inspection and Diagnostic Overview|Page 2561 > < Initial Inspection and Diagnostic Overview|Page 2559