Eclipse V6-3.0L SOHC (2003)
Interior Light Loaded Signal Input Circuit Part 2
CIRCUIT OPERATION
The ETACS-ECU operates the following equipment or functions by the interior light loaded signal:
-
Interior light automatic shutoff function
-
Front dome light, rear dome light and luggage compartment light
-
Door-ajar indicator light
TECHNICAL DESCRIPTION (COMMENT)
If the signal is not normal, the equipment or functions, which are described in "CIRCUIT OPERATION", do not work normally.
TROUBLESHOOTING HINTS
-
Malfunction of the ETACS-ECU
-
Damaged harness wires or connectors
DIAGNOSIS
Required Special Tools:
-
MB991223: Test Harness Set
-
MB991223: Scan Tool (MUT-II)
STEP 1. Measure at ETACS-ECU connector C-119 in order to check the battery line of power supply system to ETACS-ECU.
1. Disconnect ETACS-ECU connector C-119, and measure at the junction block side.