Eclipse V6-3.0L SOHC (2003)
STEP 8. Check ETACS-ECU connector C-119 for damage.
Q: Is ETACS-ECU connector C-119 in good condition?
YES: Go to Step 9.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the functions or equipment, which are described in "CIRCUIT
OPERATION", work normally, the interior light loaded signal should be normal.
STEP 9. Check the wiring harness between ETACS-ECU connector C-119 (terminal 4) and the ignition switch (ACC).
NOTE: Also check junction block connector C-112 and intermediate connector C-89. If junction block connector C-112 or intermediate C-89 is
damaged, repair or replace the connector as described in Harness Connector Inspection.
Q: Is the wiring harness between ETACS-ECU connector C-119 (terminal 4) and ignition switch (ACC) in good condition?