Eclipse V6-3.0L SOHC (2003)
OPERATION", work normally, the interior light loaded signal should be normal.
STEP 12. Check the wiring harness between ETACS-ECU connector C-119 (terminal 18) and the ignition switch (ACC).
NOTE: Also check junction block connector C-111. If junction block connector C-111 is damaged, repair or replace the connector as described in
Harness Connector Inspection.
Q: Is the wiring harness between ETACS-ECU connector C-119 (terminal 18) and ignition switch (ACC) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. If the functions or equipment, which are described in "CIRCUIT OPERATION", work normally, the interior light
loaded signal should be normal.