mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

03-13-002 > < Engine Controls - SES Lamp ON/Misfire DTC's Set|Page 3287
Page 3
background image

NOTE:

After reprogramming is completed, the new ENG ROM ID and new A/T ROM ID will display alternately with the message "Turn IG SW OFF"
every four seconds. Note this information. Verify that the new PCM part number and ROM IDs are the same as those listed in the table.

11.

Using a ball-point pen, enter the appropriate PCM part number, vendor number, ROM ID #, this TSB number TSB-04-13-003), your dealer code,
and the current date on the Engine Compartment Label (part no. MSSF-024G-00).

12.

Carefully remove all dirt and oil from a vacant area near the VECI label on the underside of the hood, and affix the Engine Compartment label.

WARRANTY INFORMATION

PCM Reprogramming tar High Speed Misfire

03-13-002 > < Engine Controls - SES Lamp ON/Misfire DTC's Set|Page 3287