Eclipse V6-3.0L SOHC (2003)
9.
For manual transmission models, select "MFI".
For automatic transmission models, select "MFI & ELC-A/T" Then press "YES".
Wait a few seconds as MUT-II verifies the ROM-ID.
10.
If the PCM has already been reprogrammed, the MUT-II will display "This ECU has already been reprogrammed." If this message displays,
STOP! Do not continue with this procedure.
11.
If the PCM is unable to be reprogrammed, the MUT-II will display "Reprogramming is not possible on this ECU." If this message displays, verify
that the correct ROM pack is installed. If the correct ROM pack is installed and this message displays, replace the PCM. Record this MUT-II
screen information and the ROM pack database number on the repair order.
a.
If you replace the PCM, be sure to verify that the new PCM has the latest software. After installing the new PCM, follow the instructions in
Step 3 to read the ECU part number and ROM ID. Then compare this information with the latest PCM software database information on the
Diamond Dealer Link and in MEDIC. Reprogram the new PCM if necessary.
12.
If the PCM can be reprogrammed, display is "Do you want to reprogram this ECU?" Press "YES".
13.
The MUT-II will display this screen as it reprograms the PCM. It will take approximately 15 minutes to complete.
CAUTION
DO NOT DISTURB THE HARNESS CABLES OR CONNECTIONS. INTERRUPTION DURING THE PROGRAMMING PROCESS COULD
CAUSE THE PCM TO LOSE DATA OR PREVENT FUTURE PCM REPROGRAMMING.
