Eclipse V6-3.0L SOHC (2003)
2. After installing the steering wheel, the remote controlled radio switch harness should be clamped at right and left sides.
3. After securing the remote controlled radio switch harness, turn the steering wheel all the way in both directions to confirm that the steering wheel
rotation is normal.
]]D[[ DRIVER'S AIR BAG MODULE INSTALLATION
CAUTION: If there is gap at place B shown in the illustration, that means the connector is not firmly inserted, i.e. not correctly connected. In such a
case, insert connector to the place, where there remains no gap at place B shown in the illustration.
1. Connect the clock spring connector securely.
2. Tighten the air bag module mounting screws to 9.0 ± 2.0 Nm (78 ± 17 in-lb).
]]E[[ POST-INSTALLATION INSPECTION
1. Reconnect the negative (-) battery cable.
2. Turn the ignition switch to the "ON" position.
3. Does the SRS warning light illuminate for approximately 7 seconds, and then remain off for at least 5 seconds after turning "OFF"?
4. If yes, the SRS system is functioning properly.
