mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Symptom Related Diagnostic Procedures|Page 197 > < Symptom Related Diagnostic Procedures|Page 195
Page 7
background image

1. Remove the airbag module (Refer to Air Bag Module and Clock Spring).

2. Check the continuity by operating the remote controlled radio switch (RH) in each position.

Q: Is the remote controlled radio switch normal?

YES: Go to Step 2.

NO: Replace the remote controlled radio switch (RH).

STEP 2. Check the switch (RH) connector C-97 and clock spring connector C-96 for damage.

Q: Is remote controlled radio switch (RH) connector C-97 and clock spring connector C-96 in good condition?

YES: Go to Step 3.

NO: Repair or replace it. Refer to Harness Connector Inspection. The remote controlled radio switch (RH) should work normally.

STEP 3. Check the wiring harness between remote controlled radio switch connector C-97 (terminals 1 and 2) and clock spring connector C-96
(terminals 4 and 5).

Symptom Related Diagnostic Procedures|Page 197 > < Symptom Related Diagnostic Procedures|Page 195