Eclipse V6-3.0L SOHC (2003)
Ignition Switch: Component Tests and General Diagnostics
Ignition Switch Continuity Check
Ignition Switch Continuity Check
Disconnect ignition switch connector C-87 without removing the ignition switch and steering lock cylinder. Then check the continuity.
Ignition Key Ring Antenna Continuity Check
1. Ignition key reminder switch continuity check.
Disconnect key reminder switch connector C-88 without removing the ignition switch and steering lock cylinder. Then check the continuity.
2. Ignition key ring antenna check.
Check the continuity between terminal 3 and terminal 7.
Standard value: 2 Ohms or less
