Eclipse V6-3.0L SOHC (2003)
Radius Arm: Service and Repair
REMOVAL AND INSTALLATION
CAUTION: * Indicates parts which should be temporarily tightened, and then fully tightened with the vehicle on the ground in the unladen condition.
REMOVAL SERVICE POINTS
<<A>> TOE CONTROL ARM AND KNUCKLE DISCONNECTION
CAUTION:
^
Do not remove the nut from ball joint. Loosen it and use special tool MB991897 to avoid possible damage to ball joint threads.
^
Hang special tool MB991897 with rope or wire to prevent them from falling.
1. Install the special tool MB991897 as shown in the figure.
