Eclipse V6-3.0L SOHC (2003)
ASSEMBLY SERVICE POINT
>>A<< PISTON ASSEMBLY INSTALLATION
1. Apply brake fluid SAE J1703 (DOT3) to the piston cup and inner surface of the release cylinder.
2. Insert the piston assembly into the release cylinder.
CLUTCH RELEASE CYLINDER INSPECTION
PISTON CUP
Check the lip of piston cup for scratch. If it is scratched, check the inner surface of the release cylinder for scratches.
RELEASE CYLINDER
Check the inner surface of the release cylinder for scratches or abnormal wear, replace if necessary.