Eclipse V6-3.0L SOHC (2003)
Holding the nut at the clutch hose side, loosen the flare nut on the clutch tube.
INSTALLATION SERVICE POINT
>>A<<CLUTCH HOSE/CLUTCH TUBE INSTALLATION
1. Temporarily tighten the clutch tube flare nut by hand, and then tighten it to the specified torque, being careful that the clutch hose does not
become twisted.
Tightening torque: 15 ± 2 Nm (12 ± 1 ft. lbs.)
2. After tightening the clutch tube flare nut, check to be sure there is no leakage of the clutch fluid.
INSPECTION
^
Check the master cylinder or clutch hose for fluid leakage
^
Check the clutch hose or tube for cracks or clogging.
