mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Wiper Switch > < Rear Wiper|Page 6233
Page 3
background image

4. Install the five mounting bolts in the shown order to install the wiper motor and link assembly.
5. Secure the wiper motor and link assembly in the wiper park position. Refer to Wiper Motor Check.  See: Testing and Inspection

]]B[[ WIPER ARM AND BLADE ASSEMBLY INSTALLATION

Install the wiper blade at the specified position (standard value).

Standard value:
Driver's side: 33 - 43 mm (1.3 - 1.7 inches)
Passenger's side: 38 - 48 mm (1.5 - 1.9 inches)

Wiper Switch > < Rear Wiper|Page 6233