Eclipse V6-3.8L (6G75) (2006)
1. Connect scan tool MB991958. Refer to "How to connect SWS monitor."
2. Turn the ignition switch to the "ON" position.
3. Diagnose the CAN bus line.
4. Turn the ignition switch to the "LOCK" (OFF) position.
Q: Is the CAN bus line found to be normal?
YES: Go to Step 2.
NO: Repair the CAN bus line (Refer to Information Bus, Diagnosis).
STEP 2. Using scan tool MB991958, read the combination meter diagnostic trouble code.
Check whether the combination meter-related DTC is set.
1. Turn the ignition switch to the "ON" position.
2. Check whether the combination meter-related DTC is set.
3. Turn the ignition switch to the "LOCK" (OFF) position.
Q: Is the DTC set?