Eclipse V6-3.8L (6G75) (2006)
/Page-664001.png)
Crankshaft Position Sensor: Service and Repair
CRANKSHAFT POSITION SENSOR
Removal Steps 1-3
REMOVAL AND INSTALLATION <3.8L ENGINE>
INSTALLATION SERVICE POINTS
>>A<< CRANKSHAFT POSITION SENSOR INSTALLATION
1. Install the crankshaft position sensor to the cylinder block front case.
2. Tighten the crankshaft position sensor mounting bolts by hand.
3. Tighten the crankshaft position sensor mounting bolts to the specified torque.
Tightening torque: 8.5 ± 0.5 Nm (76 ± 4 in-lb)
>>B<< CLIP INSTALLATION
