mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Body - Window Regulator Motor/ECU Availability|Page 7889 > < Power Window Switch|Testing and Inspection|Page 7882
Page 1
background image

Front Door Window Motor: Technical Service Bulletins
Body - Window Regulator Motor/ECU Availability

No: TSB-07-42A-002
DATE: February, 2007
MODEL: See below

SUBJECT:
DOOR WINDOW REGULATOR MOTOR/ECU SERVICE PARTS
AVAILABILITY

PURPOSE
The door window regulator motor/ECU has been made available as a separate part from the door module assembly. If the door window regulator
motorlECU requires replacement, it is no longer necessary to replace the complete door module assembly.

AFFECTED VEHICLES
2006-on Eclipse
2007-on Eclipse Spyder

PROCEDURE

The door window regulator motor/ECU can be removed from the door module by removing the three mounting screws.

After installing the new door window regulator motorlECU, initialize it as follows:

1.

Close door.

2.

Cycle window up to full top stop and hold the switch in the up position for three seconds.

3.

Cycle window to full down position.

4.

Cycle window up to full top stop and hold the switch in the up position for three seconds.

PARTS INFORMATION

Use the Genuine Mitsubishi Parts listed.

Body - Window Regulator Motor/ECU Availability|Page 7889 > < Power Window Switch|Testing and Inspection|Page 7882