mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Audio - Malfunction/Failure|Page 4456 > < Audio - Malfunction/Failure|Page 4454
Page 1
background image

Compact Disc Player (CD): Testing and Inspection

The radio and tape player does not operate in the following states.

1. Power supply to the radio and tape player has been suspended for more than one hour continuously by removing the cable from the battery

terminal or disconnecting the harness connectors.

2. The power supply to the radio and tape player has been suspended for more than one hour owing to blown fuse or discharged battery.
3. The radio and tape player has been replaced.

If the radio and tape player does not operate for these causes, input the security code by the following procedure to operate it.

Anti-Theft System

Anti-Theft System

Anti-Theft System

1. Using any of the following methods, confirm the anti-theft code.

a. Read the anti-theft code indicated on the cards retained by the user.
b. If the anti-theft code is unknown owing to the user's loss of the cards.

-

Remove the radio and tape player.

-

Read the serial no. shown on the name card of the radio and tape player.

-

Look up the anti-theft code corresponding to the serial number in the serial number-anti-theft code table; or, make inquiries to
Mitsubishi Motor Sales of America, Inc..

c. When the radio and tape player is replaced Read the security code on the cards attached to the upper surface of the replacement radio and

tape player.

NOTE:  Deliver the cards (two) to the user.

Audio - Malfunction/Failure|Page 4456 > < Audio - Malfunction/Failure|Page 4454