Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Parking Brake Cable: Service and Repair
REMOVAL AND INSTALLATION
Parking Brake Cable Assembly (Drum-In-Disc Brake)
1. Remove the floor console.
CAUTION: SRS When removing and installing the floor console, do not let it bump against the SRS-ECU or other components.
2. Remove the rear brake lining assembly and support the caliper with wire.
3. Remove the parking brake cable.
4. Reverse procedure to install, noting the following:
-
Ensuring that the parking brake stroke adjustment is within specifications. See: Parking Brake Lever/Adjustments
Shoe Adjusting Bolt
