Eclipse 20L DOHC MFI Idle Speed System Specifications
Idle Speed: Testing and Inspection
1. Before inspection and adjustment set vehicles in the following condition.
-
Engine coolant temperature: 80 - 95° C (176 - 203° F)
-
Light, electric cooling fan and all accessories: OFF
-
Transaxle: Neutral (P range on vehicles with A/T)
2. Connect the scan tool to the data link connector.
3. Start the engine and run it at idle.
4. Run the engine at idle for 2 minutes.
5. Check the curb idle speed. The standard value is 800 ±100 RPM.
NOTES:
-
The idle speed is controlled automatically by the idle air control system.
-
If the idle speed is outside the standard value, inspect the MFI components.