Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
4.
Wrap two 3-foot long heavy wires around the air bag module mounting studs. Use nuts to secure the wires.
5.
Connect the adapter harness to the air bag module. Then place the air bag module in the center of an old used mounted tire.
6.
Use the heavy wires to secure the air bag module to the tire.
7.
Place the tire flat on the ground with the air bag module facing up. To prevent damaging the adapter harness, be sure the harness has about one
foot of slack when placed under the tire.
8.
Stack three unmounted used tires on top of the air bag module.
! WARNING
To avoid personal injury, do not deploy the air bag module when anyone is near the deployment area.
9.
At an upwind location as far away from the air bag module as possible, separate the two short-circuited wires.
10.
To deploy the air bag, connect the two wires to the two battery terminals.
