mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Restraints - Revised Clockspring Alignment Procedure|Page 4347 > < Restraints - Revised Clockspring Alignment Procedure|Page 4345
Page 3
background image

CAUTION:
1. When disconnecting the air bag module-clock spring connector, take care not to apply excessive force to it.

2. The removed air bag module should be stored in a clean, dry place with the pad cover facing up.

Step 3: Steering Wheel Removal

CAUTION:  Do not hammer on the steering wheel. Doing so may damage the collapsible column mechanism.

Step 7: Air Bag Module (Front Passenger's Side) Removal

CAUTION:  The removed air bag module should be stored in a clean, dry place with the pad cover facing up.

PRE-INSTALLATION INSPECTION

1. When installing the new air bag module and clock spring, refer to "INSPECTION".

CAUTION:  Dispose of an air bag module only according to the specified procedure. 

2. Connect the battery (-) terminal.

3. Connect the scan tool to the data link connector, then check diagnostic codes.

CAUTION:  Turn the ignition switch oft before disconnecting or connecting the scan tool.

Restraints - Revised Clockspring Alignment Procedure|Page 4347 > < Restraints - Revised Clockspring Alignment Procedure|Page 4345