Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Fuel Gauge Sender: Testing and Inspection
Fuel Gauge Unit Resistance Check
Fuel Gauge Unit Check
NOTE: To test the fuel gauge unit it must be removed from the ta
1. Check that resistance value between the fuel gauge terminal and ground terminal is at standard value when the fuel gauge unit float is at point F
(highest) and point E (lowest).
Standard value:
POINT F: 4 +/- 2 Ohm
POINT E: 112 +/- 7 Ohm
2. Check that resistance value changes smoothly when the float moves slowly between point F (highest) and point E (lowest.)
