Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
3.
Remove the front glass guide. Match-mark the three securing nuts/bolts before removal so the guide can be reinstalled in the correct position.
After nut removal, remove the guide through the speaker hole.
4.
Remove the glass guide slider. The slider is attached to the front of the window with a nut and can be accessed through the speaker hole.
5.
Accessing through the speaker hole, tighten the inner nut on the glass slider mount stud on the front of the window. This step is very important.
NOTE:
The picture was taken with the window out of the vehicle, however, you do not have to remove the window to do this procedure.
