Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
REMOVAL
Follow removal steps outlined in illustration.
NOTE: Removal service points as follows:
a. Compression lower arm ball joint and knuckle/lateral lower arm ball joint and knuckle disconnection (1 & 6).
CAUTION:
-
Use the special tool to loosen the tie rod end mounting nut. Only loosen the nut; do not remove it from the ball joint.
-
Support the special tool with a cord, etc. to prevent it from coming off.
INSPECTION
1. Check the bushings for wear and deterioration.