mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Recall - Lower Ball Joint/Control Arm Inspection|Page 3798 > < Recall - Lower Ball Joint/Control Arm Inspection|Page 3796
Page 5
background image

b.

Use a small natural-hair paintbrush to apply ThreeBond 6151 sealant to the entire bottom area Of the ball joint end cap. Be sure that the
sealant covers the area between the bottom cap and the case.

WARNING

ThreeBond 6151 sealant is a flammable material. Refer to the Material Safety Data Sheet on the MMSA Diamond Dealer Link. (Select
"Parts" then "Hazardous Materials", then "Request MSDS.") Observe the sealant manufacturer's safety precautions. Wear protective
gloves while applying sealant. When disposing of the brush, observe local, state, and Federal regulations.

WARNING

Use care to prevent removing the sealant after application.

PARTS INFORMATION

WARRANTY INFORMATION

Recall - Lower Ball Joint/Control Arm Inspection|Page 3798 > < Recall - Lower Ball Joint/Control Arm Inspection|Page 3796