mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Rear Suspension - Squeak/Rubbing Noise|Page 3919 > < Rear Suspension - Squeak/Rubbing Noise|Page 3913
Page 1
background image

Technical Service Bulletin # 99-34-001

Date: 990201

Rear Suspension - Squeak/Rubbing Noise

No.: TSB-99-34-001
DATE: February, 1999 
MODEL: See Below

SUBJECT:
ABNORMAL NOISES FROM REAR SUSPENSION

This bulletin supersedes TSB-98-34-001 dated May, 1998, which should be discarded. New and/or revised information marked by **.

PURPOSE

This bulletin has procedures for repairing abnormal noises from the rear suspension on certain 1995-99 Eclipse and 1996-99 Eclipse Spyder.

BACKGROUND INFORMATION

Symptom

The customer may complain of a squeaking, a hard rubbing noise, and/or a light tapping or knocking sound from the rear suspension when driving over
bumps.

Cause

On indicated affected vehicles, the noise may be caused by either or all of the following:

^

Rear trailing arm bushings

1995 through 1998 (produced up to 9/15/97) model year vehicles are equipped with a one-piece trailing arm bushing which may squeak. Subsequent
1998 model vehicles built between 9/15/97 and 1/21/98 are equipped with the new-style two-piece trailing arm bushing, but because of insufficient
lubricant within the two-piece bushing, these vehicles may also exhibit the squeaking or rubbing noise.

^

Rear shock insulator (upper bracket assembly)

On 1997 and 1998 model year vehicles produced before 1/27/98, a light knocking or tapping noise may be coming from the rear shock insulator
(upper bracket assembly). An improved rear shock insulator is now available to correct this condition. The new parts have a raised or embossed area
on the bracket flange at 90° angles to the mounting studs.

NOTE: 

Bushings and collars should also be replaced along with the insulator bracket.

Rear Suspension - Squeak/Rubbing Noise|Page 3919 > < Rear Suspension - Squeak/Rubbing Noise|Page 3913