Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
0.81, 0.93, 1.07 and 1.19 mm (.0319, .0366, .0421 and .0469 inch).
If either side gear end play is not within specifications, remove appropriate side gear thrust washer.
Measure existing thrust washer and replace with new thrust washer that provides end play closest to center of end play specifications.
24. Install pinion gears, side gears and tabbed thrust washers by rotating pinion gears to opening in differential case.
25. Install pinion shaft.
26. Install pinion shaft roll pin by tapping in with a hammer and steel punch.
27. Install ring gear bolts.
NOTE: Always use new ring gear bolts and torque to 95 Nm (70 ft. lbs.).