mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Hydraulic Hose, Clutch|Service and Repair|Page 2841 > < Clutch Master Cylinder|Diagrams|Page 2837
Page 1
background image

Hydraulic Hose: Service and Repair

REMOVAL

1. Drain clutch fluid.
2. Follow removal steps outlined in illustration.  See: Manual Transmission/Transaxle

NOTE:  Removal service points as follows:

A. Clutch hose removal. (12)

Holding the nut at the clutch hose side, loosen the flare nut on the clutch pipe.

INSPECTION:

1. Check the pedal shaft bushing for wear.
2. Check the pedal arm for bend or torsion.
3. Check the turnover spring for deterioration.
4. Check the master cylinder or clutch hose for fluid leakage.
5. Check the clutch hose or pipe for cracks or clogging.

INSTALLATION

Installation in reverse order as removal.

Hydraulic Hose, Clutch|Service and Repair|Page 2841 > < Clutch Master Cylinder|Diagrams|Page 2837