Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
3. Install 3rd gear and 3/4 synchronizer onto input shaft. Install MD998812, MD998813, MD998821 or equivalents over input shaft and press on
synchronizer hub and 3rd gear. The synchronizer hub has the letter "U" stamped on the top face of the hub.
This designates that the hub must be installed with the "U" facing upward.
4. Install 3/4 synchronizer snap ring into slot on input shaft.
5. Install blocking ring into 3/4 synchronizer. Install 4th gear caged needle bearing.
6. Install 4th gear onto input shaft.
7. Install 4/5 split thrust washer separation pin.
