Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Control Module: Service and Repair
Resetting Procedure
1. Disconnect the negative battery cable from the battery before replacing the transaxle or carrying out an overhaul.
2. After work has been completed, check the Diagnostic Trouble Codes (DTC). If DTC No. 12 ("Battery power was disconnected since last power
down") has been generated, this DTC must be cleared.
Furthermore, select "Special function" on the scan tool and then set the scan tool to Quick Learn mode (carry out this operation from the scan tool
screen). Then input the clutch volume index into the Transmission Control Module (TCM).
