Eclipse GS-T L4-1997cc 2.0L DOHC Turbo MFI (1998)
Upper Arm Ball Joint Dust Cover Replacement
NOTE: Replace the dust cover by the following procedure only if the dust cover has become damaged by accident during servicing.
1. Remove the dust cover.
2. Apply multipurpose grease to the lip and inside of the dust cover.
3. Drive in the dust cover with special tool until it is fully seated.
4. Press the dust cover with a finger to check whether the dust cover is cracked or damaged.
Compression Lower Arm and Lateral Assemblies
REMOVAL
Follow removal steps outlined in illustration.
Removal Service Points
